Designed to mount to the inside of your hull and transmit the sonar signal through the hull itself
Single/dual transducer with 15-foot cable and slow-cure epoxy included
Compatible with many PiranhaMax, FF and Matrix series Humminbird sonar systems
Hull must be of single-layer, fiberglass construction and be free of trapped air or voids
Backed by manufacturer's one-year limited warranty
Product Description:
Puck transducers mount to the inside of most fiberglass hulls and transmit the sonar signal through the hull. The hull must be of single layer fiberglass construction. (Cored fiberglass, metal or wood are not acceptable) and be free of trapped air and voids. The transducer is glued in with slow ... (read more)
Amazon.com Product Description:
The Humminbird XP 9 20 Puck Transducer is designed to mount to the inside of most fiberglass hulls with a deadrise less than 15 degrees, and transmit the sonar signal through the hull itself. Your boat's hull must be of single-layer, fiberglass construction and be free of trapped air or voids in ord... (read more)